ShineACS Security

Do you know what ’re  the common faults of  electrical bolt lock ?And how to solve this faults? 1, Fault 1:  Open the double glass door and install two electric mortise locks. After a period time, sometimes this or that tapered end cannot be down. What is the cause of the trouble? There are two reasons: 1.1  Power problem. There are two kinds of power problems: 1.11  One is the lack of power supply, that is, the power of the supply is not enough, or the actual power cannot reach the nominal value. You can try a more powerful supply because it will better with the greater power supply, which will have little side effects for the system. It is important to note that the voltage is not enough for the power, but it should make sure that the voltage and electric current are enough. 1.12  The other one is the arrangement of the line is not standardized, resulting in power problems. For example, the line from the control...

Let's try to understand both electric rim lock and electric strike lock features first! 1, Advantages, disadvantages of electric strike lock and electric rim lock. 1.1 Electric rim lock 1.1.1 Advantages: It applies to cell gate and interlocking access door of bank saving agency. Power-off model is offered, which means key could be used to open door externally and pressing the mechanical button could open the door when power-off internally. 1.1.2 Disadvantages: Noisy, crack when unlocking even though there is mute lockset on the market. Heavy impulse current creates a negative effect on the system. Even though “electric lock” (the same appearance) which can control the impulse current appears on the market, low-cost, noisy electric rim lock with heavy impulse current still exists. 2.1 Electric strike lock 2.1.1 Advantages: Models of power-off closing, a cheap one can be selected. When power is off, the round mechanical lock can be turned on in...

Types of Electric strike commonly used in access control: electric bolt lock, Magnetic lock, electric strike lock, electric rim lock (followed by popularizing rate): 1. Electric bolt lock Access Control Electric Bolt Lock SL-E153SLDN Used to open the door on the occasion of the power cut. It is required by fire protection that the power should be off automatically in the buildings with the outbreak of fire. And the electric strike should be unlocked to make people escape easily. That’s why most electric strike will be unlocked after power off. 1.1 Types of electric bolt lock: electric bolt lock is classified into 4 types by its wire: electric bolt lock with 2 wires, 4wires, 5wires and 8 wires. 1.11   Electric bolt lock with 2 wires : Two Wires Normal Electric Bolt lock SL-E200S There are two wires, include the red one and the black one. The red wire connects with the power and 12VDC while the black wire connects with GND. ...