ShineACS Security

After your system integrator finishing your  access control project , do you know how to check your access control project work well and What’s the acceptance standard for an access control projects? This article is written to Party A(Access control project customer), especially someone is not very well versed in the access control system. Of course, this article can also give an important reference to the construction personnel. 1, Check the equipment quantity. According to the types of equipment list acceptance quantity, the main acceptance: the number and type of access controller, the number of  the card reader , the number of  electric locks . Spot check part of the model, see whether the goods are not the right board. 2, If it is  485 controller , the main acceptance is checking communication wiring specification. This is very important if the wiring is not standard, even now the communication is normal, does not guarantee you to pay o...

Do you know how to configure access control system?And what parts does an access control system have? 1,485 bus network access control system configuration principles and methods 1.1   Card reader  and button configuration principles: In principle, one door with one door reader and one exit button.If the customer requests to choose a good cost-effective ID card, please choose the  ID card reader , if the customer for consumer and other card occasions, please use  Mifare IC card reader. If the customer requests to go out to swipe credit card verification, then a door configuration two card reader, no need exit button. Note:  In some special occasions, for example, the company needs to install an exit button to go out the door and the front desk, the door needs to be configured with two buttons, and the exit button of the same door can be used in parallel. 1.2   The controller  configuration principles: There are several doors...