ShineACS Security

Do you know how to configure access control system?And what parts does an access control system have? 1,485 bus network access control system configuration principles and methods 1.1   Card reader  and button configuration principles: In principle, one door with one door reader and one exit button.If the customer requests to choose a good cost-effective ID card, please choose the  ID card reader , if the customer for consumer and other card occasions, please use  Mifare IC card reader. If the customer requests to go out to swipe credit card verification, then a door configuration two card reader, no need exit button. Note:  In some special occasions, for example, the company needs to install an exit button to go out the door and the front desk, the door needs to be configured with two buttons, and the exit button of the same door can be used in parallel. 1.2   The controller  configuration principles: There are several doors...

Do you know what ’re  the common faults of  electrical bolt lock ?And how to solve this faults? 1, Fault 1:  Open the double glass door and install two electric mortise locks. After a period time, sometimes this or that tapered end cannot be down. What is the cause of the trouble? There are two reasons: 1.1  Power problem. There are two kinds of power problems: 1.11  One is the lack of power supply, that is, the power of the supply is not enough, or the actual power cannot reach the nominal value. You can try a more powerful supply because it will better with the greater power supply, which will have little side effects for the system. It is important to note that the voltage is not enough for the power, but it should make sure that the voltage and electric current are enough. 1.12  The other one is the arrangement of the line is not standardized, resulting in power problems. For example, the line from the control...

Let's try to understand both electric rim lock and electric strike lock features first! 1, Advantages, disadvantages of electric strike lock and electric rim lock. 1.1 Electric rim lock 1.1.1 Advantages: It applies to cell gate and interlocking access door of bank saving agency. Power-off model is offered, which means key could be used to open door externally and pressing the mechanical button could open the door when power-off internally. 1.1.2 Disadvantages: Noisy, crack when unlocking even though there is mute lockset on the market. Heavy impulse current creates a negative effect on the system. Even though “electric lock” (the same appearance) which can control the impulse current appears on the market, low-cost, noisy electric rim lock with heavy impulse current still exists. 2.1 Electric strike lock 2.1.1 Advantages: Models of power-off closing, a cheap one can be selected. When power is off, the round mechanical lock can be turned on in...

Types of Electric strike commonly used in access control: electric bolt lock, Magnetic lock, electric strike lock, electric rim lock (followed by popularizing rate): 1. Electric bolt lock Access Control Electric Bolt Lock SL-E153SLDN Used to open the door on the occasion of the power cut. It is required by fire protection that the power should be off automatically in the buildings with the outbreak of fire. And the electric strike should be unlocked to make people escape easily. That’s why most electric strike will be unlocked after power off. 1.1 Types of electric bolt lock: electric bolt lock is classified into 4 types by its wire: electric bolt lock with 2 wires, 4wires, 5wires and 8 wires. 1.11   Electric bolt lock with 2 wires : Two Wires Normal Electric Bolt lock SL-E200S There are two wires, include the red one and the black one. The red wire connects with the power and 12VDC while the black wire connects with GND. ...

Let's try to know how to choose a suitable  access control power supply for your  access control project The power supply is an important part to stabilize the whole  access controller  even though access controller is the core of the system. There are two matters of access power supply’s selection: Linear powers or   switching power supply   is better? How much power is fitted? 1, Is Linear powers or switching power supply better? Linear powers Advantage: stable performance without the interference of high-frequency ripple. Disadvantage: heating, low use ratio of power without any superpower to select. Switching power supply Advantage: high power supply is easy to supply the power for it. And it shows a better cost-performance ratio. Small size, lightweight and many options for brands and models. Disadvantage: low-quality power supply and uncontrollable high-frequency ripple will cause the access controller crashed an...

What's Door Access Control Systems Access control systems provide authorized individuals safe and secure access in and out of various parts of your business while keeping unauthorized people out. They can range from electronic keypads that secure a single door to large networked systems for multiple buildings. Access Systems also greatly simplify management of your facility: no need to replace lost keys, hunt down old keys from terminated employees, or wonder who has access to which areas. Spend a couple minutes framing the following two questions; (1) What purpose will your door access control service serve? (2) What size access system will your business need? 1. What purpose will your Door Access Control system serve? To start, sit down and determine the purpose the access control system will serve. The most basic role of an access control system is to keep out anyone who is not supposed to enter an area. This can be the front door, a parking garage, a server roo...

What kind of  fingerprint device  can connect  with  access control device ? How does the fingerprint device  supply power ? Other biometric systems (iris ,  palm type instrument, etc.) and how  do they connect with  access control system? Generally fingerprint equipment manufacturers will also produce fingerprint access control device, fingerprint, and access control functions will be integrated in one machine, this kind of access control device’s function is relatively simple, can only be used for common functional requirements and security level requirements are not high, and "Fingerprint + access controller" can be used for functional requirements more professional, more demanding security occasions and areas. What kind of equipment can  connect with  access control device? As long as the fingerprint device (fingerprint reader, fingerprint attendance, fingerprint access control, etc.) with Wiegand26 ou...